English
System
Mode - User
HDMI[MHL2.1]
Gaming
Picture
Color
Input
Audio
OSD
Full
DP 1.2
Hot Key Assignment
DDC/CI
DP Format
System
Wide Mode
PIP/PBP
X
Enter
Move
Clone
Daisy Chian
On
Auto Source
Mode - User
Gaming
Picture
Color
Audio
OSD
System
X
Enter
Move
Off
Quick start mode
Nomal
HDMI Black Level
Save setting to...
Save setting to...
1.
Press the MENU key to open the OSD.
2.
Toggle the joystick to the up or down to select System from the OSD.Then toggle to the right to
navigate to the element you wish to adjust and press the joystick to enter it.
3.
Toggle to the left or right to adjust the sliding scales.
4.
Input: Select the source from DP In, HDMI 2.0,HDMI(MHL),or miniDP.
5.
Auto Source:The default is “On”, can support auto search for signal source in order.
6.
Daisy Chain: Default is extend, can select daisy chain function extend or clone. Clone Mode is not
supported with Adaptive-Sync
7.
DP Format :Default is DP1.2, can selection DP support DP1.1 or DP1.2 format.
8.
Wide mode: You can select which screen aspect you are using. The options are Full, Aspect, and 1:1.
9.
PIP/PBP settings
10. Hotkey Assigment: Select the function of shortcut key 1(Modes, Brightness, Input, Volume, Gamma,
Contrast, Blue Light, Over Drive,PIP/PBP) and shortcut keys 2 (Modes, Brightness, Input, Volume,
Gamma, Contrast, Blue Light, Over Drive,PIP/PBP)
11. DDC/CI: Allows the monitor settings to be set through the software on the PC.
‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑‑
Note:
DDC/CI, short for Display Data Channel/Command Interface, which allows monitor controls
to be sent via software.
12. HDMI Black level setting
13. Quick start mode: Select Off or On. Turn on to speed up boot speed.
