EN-17
Adjusting the Performance
1.
Press the MENU button to open the OSD.
2.
Using the Navi/OK button, select Performance from the OSD. Then
navigate to the setting you wish to change.
3.
Use the Navi/OK button to select the setting.
4.
Over Drive: Select Off, Normal, or Extreme.
5.
Adaptive-Sync: Select On or Off. Adaptive-Sync is available for AMD
supported graphic cards only.
6.
Refresh rate num: Display the panel’s current refresh rate on the screen.
7.
VRB: When VRB is Extreme or Normal, VRB provides a sharper and clearer
dynamic picture; the default is Off.
•
VRB does not support PIP/PBP Mode and HDR Mode. (Selective
models)
•
When VRB is Extreme or Normal, Adaptive-Sync is automatically
turned off.
•
VRB will affect the brightness of the following: Logo, Aim Point,
Message and Input Icon.
•
VRB feature is dependent on the monitor’s maximum refresh
rate. For monitors supporting up to 75 Hz, VRB is available
when the refresh rate is set to 75 Hz only.
