1-22
Disassembly Procedures
3. Close the top assembly and lift the right side of LCD hinge until it is fully extended
(
).
Figure 1-30. Mainboard Removal
4. Gently peel off the mylar (B) from the mainboard. While detaching the mylar, be
careful to release it from the guide pins (C) (
).
5. Detach the adhesive tape (D) securing the keyboard backlight FPC (
).
Figure 1-31. Mainboard Removal
6. Disconnect the 40-pin USB board FFC to the mainboard connector (E) (
7. Disconnect the keyboard FPC from the mainboard connector (F) (
).
8. Disconnect the touchpad FFC from the mainboard connector (G) (
9. Disconnect the keyboard backlight FPC from the mainboard connector (H)
(
).
D
B
C