27
3. Install the ISP tool.
Note: If the F/W Upgrade use the same ISP tool as the EDID writing, you must close the EDID writing tool
before running the F/W Upgrade tool.
3.1 Copy the three file in one folder.
3.2 Double-click
to run the ISP tool.
3.3 Connect to the monitor. Click “Connect”. If the tool communicate with monitor successfully, the tool will detect the
flash type of monitor.
Summary of Contents for CB282K
