9
Eng
lis
h
Installation
To install the monitor on your host system, please follow the steps below:
Steps
1
Connect the video cable
a
Make sure both the monitor and computer are switched off.
(1) Make sure both the monitor and computer are switched off.
(2) Connect one end of the 24-pin DVI cable to the back of the
monitor and the other end to the computer's port.
2
Connect the power cord
Connect the power cord to the monitor, then to a properly grounded AC
outlet.
Turn on the monitor and computer
Turn on the monitor first, then the computer. This sequence is very
important.
If the monitor does not function properly, please refer to the
troubleshooting section to diagnose the problem.
Connect the digital cable (only for
DP
models).
(1) Make sure both the monitor and computer are switched off.
(2) Connect one end of the 2
0
-pin D
P
cable
to the back of the
monitor and the other end to the computer's port.
Optional:Connect the audio input socket(AUDIO IN) of the LCD monitor
and the line-out port on the computer with th
e
audio cable.
3
4
5
HDMI Cable (Only HDMI
Input Model)
a. Make sure both the monitor and computer are powered-OFF.
b. Connect the HDMI
cable to the computer.
b
Connect the digital cable (only for dual-input models).
c
d
POWER
DP
AUDIO IN
DVI-D IN
HDMI (MHL)
DVI-D IN
HDMI
DP
POWER
DP
AUDIO IN
DVI-D IN
HDMI (MHL)
HDMI
Note: Adjustment of the volume control as well as the equalizer to other settings than the center position
may increase the ear-/headphones output voltage and therefore the sound pressure level.
