ACER CB242Y
7
4. Disassembly and Assembly SOP
CB242Y
4.1 Disassembly Procedures
Preparation before disassemble
1.Clean the room for disassemble
2.Identify the area for monitor
3.Check the position that the monitors be placed and the quantity of the monitor ;prepare the area for
material flow; according to the actual condition plan the disassemble layout
4.Prepare the implement, equipment, materials as bellow:
1) working table
2) Screw-driver: Philips-head screwdriver, Hex-head screwdriver
3) knife
4) glove
5) cleaning cloth
6) ESD protection
After unplugging the power cord, the power board still have power energe. Please pay attention
when disassembling/assembling.
S1
Disassemble the RC,
stand and base
Before Disassembling & Assembling, monitor need to be put on the sponge and
the Insulation glove must be wore during the process.
Disassemble base and column from the RC(Rear Case).
Unlock 4 RC screws and the RC center screw as picture 1.
Disassemble RC from monitor.
S2
Disassemble FFC Ctrl
from the PCBA.
Tear off the adhesive tape from the RC as picture 1.
Disassemble the CTRL BD from the RC and disassemble the FFC CTRL from the
CTRL BD as picture 2.
PICTURE 1 PICTURE 2
C
TRL
BD
C
TR
L
B
D
