Getting started
Two wireless motion controllers are
provided, one for each hand.
Connecting your headset
See the instructions in the
Acer Mixed
Reality Headset Quick Start Guide
for
information about setting up your headset.
Note:
If you are not prompted to set up
your controllers, open the Mixed Reality
app on your computer, select the More (...)
icon, then
Set Up Controllers
.
Preparing your controllers
Slide open the battery compartment on each
controller and insert two AA batteries; follow
the battery orientation shown on the inside of
each battery slot.
The controllers use two AA Alkaline batteries
each.
Do not close the battery compartment until
you have paired both controllers with your
computer - Bluetooth pairing buttons are
inside the compartment.
Powering on your controllers and
Bluetooth pairing
The controllers uses
Bluetooth to connect to
your headset/computer.
When the headset is
connected and Mixed
Reality Portal shows up
on the screen, press
and hold the
Windows
button on each
controller to turn them on. The controller
vibrates and the LED lights turn on to show
the controller is on, then the controllers will
be automatically paired with the headset.
Or you can,
1. Go to
Windows Settings
>
Devices
>
Add Bluetooth or other devices
>
Bluetooth
.
2. Select
Add Bluetooth or other device
and see it starting to discover Bluetooth
devices.
