6
2.1 Disassembly Procedures:
Prepare a main board, a power board, an USB board and some essential cables. Connect every cable as
the below picture.
Use a screwdriver to tighten the screws till the power board and USB board with shield are firmly attached
then put the mylar with main board aim at the two screw bolts of mainframe and tighten the screws of main
board.
S1
S2
Summary of Contents for B247Y
Page 11: ...11 Assemble the stand and base ASS Y S8 ...
Page 15: ...15 Remove the screws to separate the panel and the Middle Frame and the DECO BEZEL S5 ...
Page 17: ...17 Remove the main board and power board Disconnect the cables S7 ...
Page 20: ...20 4 3 Click ISP and ISP Option to set the Erase Setting as below ...
