manualshive.com logo in svg

Acer AX1400, Service Manual

Share
Download
Acer AX1400 Service Manual Download Page 85

Aspire AX1400 Service Guide

77

This chapter gives you the FRU (Field Replaceable Unit) listing of the Aspire AX1400 computer global 
configurations. Refer to this list when ordering for repair parts or for RMA (Return Merchandise Authorization).

Exploded Diagram    

  

IMPORTANT

When ordering FRU parts, check the most up-to-date information available on your regional 
web or channel. For whatever reasons a part number is changed, it will NOT be noted on the 
printed Service Guide. For Acer authorized service providers, your Acer office may have a 
different part number code from those given in the FRU list of this printed Service Guide. You 
MUST use the local FRU list provided by your regional Acer office to order FRU parts for 
service.

NOTE

Follow the local government regulations, or the rules set by your regional office on how to return or 
dispose of defective parts. 

Field Replaceable Unit (FRU) List 

Chapter 6

Summary of Contents for AX1400









































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands