English
2
A
ttaching
/ R
emoving
the base
Install: Align the base with the stand and push the base towards the top of
the monitor, and then rotate the base clockwise. Tighten the screw clockwise.
Remove:
Press release bottom and reverse the steps to remove the base.
Warning:
•
actions
Below
are not allowed while moving and walking: high adjustment, tilt,
swivel and pivot because of safety requirement.
•
To prevent fragile panel broken, when moving and disassembling the product , it
must pull the monitor head to the top at first and place the horizontal direction on
the table.
