English
13
2
Setup Wizard
Step 5. Setup is now complete. You are ready to begin watching TV.
If you leave the setup process before it is complete, you will be given a choice of options:
1. Resume setup
2. Resume setup at next startup
3. Exit and don't remind me
Select an option and press
OK
to exit.
3
Changing channels
a. Press 0-9 on the remote control to select a channel. Only
the channel 1~9 will change after 2 seconds. Press
ENTER
to
select the channel immediately.
b. Pressing the channel (
CH
) up/down button on the remote
control will also change the channel.
4
Adjusting the volume
Adjust the volume level using the (
VOL
)
up/down button on
the remote control.
Setup may vary due to local broadcast differences.
AT4202P.EU.EN.indb 13
3/8/2006 9:12:51 PM
