Acer AT4202P, Service Manual

Page: 40 / 99

Page 40 of 99
5. Click the Prog key , it will show duologue window as picture 5 ,it start to write he soft ware ,
6.
RE: It will use about 3 minute to write soft ware, Do not turn-off the PDP during that time;
otherwise it will make the Flash IC break.
figure 5
7. Finish writing, it will show duologue window as picture 6, it mean end, click OK.
Clicking DELINK key .then CLOSE key exit the programme.
figure 6
8. Turn-off the PDP. Pull out RS232 wire. then turn-on the PDP and enter factory menu
，
watch the edition of
soft ware whether or not the same with edition of writing.