10
D-SUB PIN Distribution
This procedure gives you instructions for installing and using the LCD TV display.
(1) Position the display on the desired operation and plug the power cord into a convenient AC outlet.
Three-wire power cord must be shielded and is provided as a safety precaution as it connects the chassis
and cabinet to the electrical conduct ground. If the AC outlet in your location does not have provisions for
the grounded type plug, the installer should attach the proper adapter to ensure a safe ground potential.
(2) Connect the 15-pin color display shielded signal cable to your signal system device and lock both screws
on the connector to ensure firm grounding. The connector information is as follow:
15 - Pin Color Display Signal Cable
Pin NO.
Description
Pin NO.
Description
1 Red
Video 9
+5V(PC97)
2
Green Video
10
VGA-CONN(Sync GND)
3
Blue Video
11
Ground
4
Ground
12
SDA(DDC
Data
)
5 Ground 13 H-Sync.
6 Red
Ground 14
V-Sync.
7
Green Ground
15
Serial Clock for DDC
8 Blue
Ground
1
6
11
15
5
10
Summary of Contents for AT2002
