![background image](http://html.mh-extra.com/html/acer/at110-series/at110-series_user-manual_6156094.webp)
Appendix A: Server management tools
78
RAID configuration utilities
RAID on the AT110 system is provided through either the onboard
SATA controller or through a controller board option.
Caution: Creating a RAID volume erases all data previously saved
in the hard drives. Make sure that you back up important files
before starting a RAID configuration process.
Onboard SATA RAID Configuration Utility
This section explains how to create a RAID volume using the onboard
SATA controller.
To enable the onboard SATA RAID controller:
1
Turn on the server and the monitor.
If the server is already turned on, close all open applications, then
restart the server.
2
During POST, press <F2> to access the BIOS Setup Utility.
3
Select the Advanced > SATA Configuration submenu.
4
Change the setting of the SATA RAID Enable field from Disabled to
Enabled.
5
Press <F10>.
6
Select Yes to save the new SATA RAID settings and close the Setup
Utility.
Entering the onboard SATA RAID Configuration
Utility
After rebooting your computer, wait until you see the RAID software
prompting you to press <Ctrl> + <I>. The RAID prompt appears as part
of the system POST and boot process prior to loading the OS. You have
a few seconds to press <Ctrl> + <I> before the window disappears.
Create RAID Volume
1
Press <Enter> under Create Raid Volume to set up RAID.
Summary of Contents for AT110 Series
