Chapter 1
3
USB Ports
•
USB2.0:
•
Rear IO : * 4 ports
•
Internal Header:
•
*4 ports (2 * USB2.0 H5X2 Header) for B75
•
- All ports should meet USB IF spec and support 1A current over drive.
•
USB3.0:
•
Internal Header: * 2 ports.
•
One port support USB fast charging.(Meet USB battery charging spec. ver. 1.2. , Apple charging
including ipad.) The other port support standard USB 3.0 downstream port.
•
Support fast charging in S0, S3, S4, S5, G3 to S5.
•
All ports should meet USB IF spec and support 2A capability for each port (S0).
•
reserve design for two USB 3.0 standard down stream ports.
•
Internal USB 3.0 H10x2 connector, follow the Industrial standard
•
H2x1 with Vbus which is required to provide 3A current to front daughter board
•
Charging IC is required for fast charger. (ODM proposed)
•
Rear IO: * 2 ports.
•
All ports should meet USB IF spec and support 2A capability for each port (S0).
Buzzer
•
1 on board buzzer.
Rear I/O connectors
•
1 * PS2 KB+MS
•
1 * VGA connector
•
1 * HDMI
•
1 * RJ45 + Dual USB2.0
•
1 * Dual USB2.0 connector
•
2 * USB 3.0 stack
•
1 * 3 ports Audio jack
On-board connectors
•
1 * ILM(Independent Loading Mechanism) for LGA 1155 CPU (assign by Acer).
•
1 * 24-pin ATX PWR connector.
•
1 * H2X4 Power Supply Connector.
•
4 * DDR3 DIMM Socket.
•
2 * SATA 3Gb/s.
•
1 * SATA 6Gb/s.
•
2 * USB2.0 H5X2 Header (support 4 ports).
•
1 * USB 3.0 H10x2 Header (support 2 ports).
•
1 * H2x1 for Vbus.
•
1 * Front Audio Pannel H5X2 header.
•
1 * Front Panel IO H7X2 Header for Acer pin define.
•
1 * H1X4 CPU with SAMRT FAN controller.
•
1 * H1X4 System with SAMRT FAN controller (co-lay with 3 pin FAN control).