Chapter 2
25
Legacy IDE Channels
Use this item to set up the primary and
secondary sequence of IDE channels and SATA
channel. If set ATA/IDE Configuration to
Compatible mode and IDE channels to SATA Pri/
PATA Sec, users can only plug in SATA devices
on SATA1 and SATA2; if set ATA/IDE
Configuration to Compatible mode and IDE
channels as SATA Sec/PATA Pri, users can only
plug in SATA devices on SATA3 and SATA4
N/A
Primary/Second IDE
Master/Slave
Allows you to configure the hard disk drive
connected to the master or slave port of IDE
channel. To enter the IDE Primary/Secondary
Master/Slave setup, press [Enter] .
N/A
Drive A
Allows you to configure you floppy drive A
360K, 5.25” : 5.25 inch PC type standard
drive ; 360Kbyte capacity
1.2M, 5.25” : 5.25 inch AT-type high-density
drive; 1.2M byte capacity (3.5 inch when 3
Mode is Enabled)
720K, 3.5” : 3.5 inch double-sided drive;
720Kbyte capacity
1.44M, 3.5” : 3.5 inch double-sided drive;
1.44Mbyte capacity
2.88M, 3.5” : 3.5 inch double-sided drive;
2.88Mbyte capacity
Parameter
Description
Options
