Acer Aspire T180, Service Manual, Page: 36 / 83

29 Chapter 2
IDE Devices
Halt On This item defines the operation of the system
POST(Power On Self Test) routine. You can use
this item to select which types of errors in the
POST are sufficient to halt the system. All, But Keyboard
Base Memory, Extended
Memory, and Total Memory Total based and extended memory, and I/O ROM
384KB available to the system. total memory of the system.
Parameter Description Options
IDE HDD Auto-Detection Press <Enter> while this item is highlighted to
prompt the Setup Utility to automatically detect
and configure an IDE device on the IDE channel.
Access Mode(Auto) This item defines ways that can be used to
access IDE hard disks such as LBA(Large Block
Addressing). Leave this value at Auto and the
system will automatically decide the fastest way
to access the hard disk drive.
Parameter Description Options
Phoenix-Award WorkstationBIOS CMOS Setup Utility
IDE Channel 0 Master
mnlk
F5:Previous Values F7:Optimized Defaults
: Move Enter: Select +/-/PU/PD:Value F10:Save ESC:Exit F1: General Help
IDE HDD Auto-Detection [Press Enter]
IDE Channel 0 Master [Auto]
Access Mode [Auto]
Capacity 80 GB
Cylinder 38309
Head 16
Precomp 0
Landing Zone 38308
Sector 255
Item Help
ff
Menu Level
To auto-detect the
HDD’s size, head... on
this channel