Chapter 5
76
Before setting jumpers
Use the mainboard jumpers to set system configuration options. Jumpers with more than one pin are
numbered. When settting the jumpers, ensure that the jumper caps are placed on the correct pins.
Illustration
Description
The illustrations below show a 2-pin jumper. When the
jumper cap is placed on both pins, the jumper is
SHORT
.
If you remove the jumper cap, or place the jumper cap on
just one pin, the jumper is
OPEN
.
This illustration shows a 3-pin jumper. Pins 1 and 2 are
SHORT
.
Short Open
1 2
3
Jumper and Connector Information
Chapter 5