background image

44

Chapter 4

04

Check CMOS diagnostic byte to determine if battery power is OK and CMOS checksum is 
OK.  Verify CMOS checksum manually by reading storage area.  If the CMOS checksum is 
bad, update CMOS with power-on default values and clear passwords.  Initialize status 
register A.Initializes data variables that are based on CMOS setup questions.  Initializes 
both the 8259 compatible PICs in the system

05

Initializes the interrupt controlling hardware (generally PIC) and interrupt vector table.

06

Do R/W test to CH-2 count reg.  Initialize CH-0 as system timer. Install the POSTINT1Ch 
handler.  Enable IRQ-0 in PIC for system timer interrupt.Traps INT1Ch vector to 
"POSTINT1ChHandlerBlock."

07

Fixes CPU POST interface calling pointer.

08

Initializes the CPU.  The BAT test is being done on KBC.    Program the keyboard controller 
command byte is being done after Auto detection of KB/MS using AMI KB-5.

C0

Early CPU Init Start -- Disable Cache ?C Init Local APIC

C1

Set up boot strap processor Information

C2

Set up boot strap processor for POST

C5

Enumerate and set up application processors

C6

Re-enable cache for boot strap processor

C7

Early CPU Init Exit

0A

Initializes the 8042 compatible Key Board Controller

0B

Detects the presence of PS/2 mouse.

0C

Detects the presence of Keyboard in KBC port.

0E

Testing and initialization of different Input Devices.  Also, update the Kernel Variables.Traps 
the INT09h vector, so that the POST INT09h handler gets control for IRQ1.  Uncompress 
all available language, BIOS logo, and Silent logo modules.

13

Early POST initialization of chipset registers.

24

Uncompress and initialize any platform specific BIOS modules. GPNV is initialized at this 
checkpoint.

30

Initialize System Management Interrupt.

2A

Initializes different devices through DIM.

 

See DIM Code Checkpoints section of document 

for more information.

2C

nitializes different devices.  Detects and initializes the video adapter installed in the system 
that have optional ROMs.

2E

Initializes all the output devices.

31

Allocate memory for ADM module and uncompress it.  Give control to ADM module for 
initialization.  Initialize language and font modules for ADM.   Activate ADM module.

33

Initializes the silent boot module.  Set the window for displaying text information.

37

Displaying sign-on message, CPU information, setup key message, and any OEM specific 
information.

Checkpoint

Description

Summary of Contents for ASPIRE M5802(G)










































































































Reviews: