background image

Chapter 2

17

Advanced Chipset Features

    

Parameter

Description

Option

Intel EIST

When enabled, this feature allows the OS to reduce power consumption. 

When disabled, the system operates at maximum CPU speed.

Enabled

Disabled

Intel XD Bit

When enabled, the processor disables code execution when a worm 
attempts to insert a code in the buffer preventing damage and worm 
propagation. 

When disabled, the processor forces the Execute Disable (XD) Bit feature 
flag to always return to 0. 

Enabled

Disabled

Intel VT

Enables or disables the Virtualization Technology (VT) availability. If 
enabled, a virtual machine manager (VMM) can utilize the additional 
hardware virtualization capabilities provided by this technology. 

Note:

 A full reset is required to change the setting. 

Enabled

Disabled

Memory Hole Remapping

Enables or disables remapping of overlapped PCI memory above the total 
physical memory. 

Enabled

Disabled

Primary Video

Select a graphic controller as a primary boot device. 

Auto 

PCIE

Onboard VGA

Summary of Contents for ASPIRE M5802(G)










































































































Reviews: