Chapter 1
25
Configuring Your Set-Top Box
To configure Media Center to properly recognize a set-top box:
1. On the Media Center Home Page, select
Setting
.
2. Select
TV
>
Set up TV signal in Media Center
.
3. On the TV signal screen, select
Next
.
4. Select
Yes
to confirm region detected by Media Center.
5. Choose your TV signal, then select
Next
.
6. If you have a set-top-box, select
Yes
>
Next
, then proceed to step 7. If not select
No
>
Next
.
7. Select the number of tuners you want to configure, then select
Next
.
8. Select the type of cable connected to the set-top box, then select
Next
.
9. Set up your remote control to work with your set-top box, then select
Next
.
10. Choose your TV signal, then select
Next
.
11. Choose
Yes
if you have a set-top box remote control, then select
Next
.
12. Choose the number of digits for the highest channel number you receive on your system, then select
Next
.
13. Specify how you change channels, then select
Next
.
14. Select your set-top box brand, then select
Next
.
15. Choose a remote control code, then select
Next
.
16. Use the numeric buttons on the remote control to try changing channels, then select
Next
.
17. Select a remote control IR signal speed, then choose the number of digits you receive in you TV signal, then
select
Next
.
18. Select
Next
to confirm signal speed.
19. After you finished setting up your TV signal, you will be prompted to set up your program guide.
Closing Media Center
1. Press
on the remote control to enter the Media Center Home Page.
2. Use the remote control to navigate to the Shut Down button on the upper left corner of the screen, then press
OK
. The Media Center shutdown window will appear and the optional items are Close Media Center, Log Off,
Shut Down, Restart and Stand by.
Warning!
Never unplug the power cable when the system is in standby mode. Unplugging the power
cable will cause irrecoverable errors to your system.
3. Select the desired item and press
OK
.
Summary of Contents for Aspire iDea 500 Series
Page 14: ...Chapter 1 5 Block Diagram ...
Page 15: ...6 Chapter 1 Main Board Placement ...
Page 16: ...Chapter 1 7 ...