System Utilities
2-24
Clearing the Password Check and BIOS Password
Clearing the Password Check
The password check can be removed by shorting the “RTC_RST” point with a metal instrument.
1.
Remove the lower cover door and the memory module (refer to
System Utilities
on page
2-2
).
2.
Remove the battery (refer to
System Utilities
on page
2-2
).
3.
Under the memory module slots, locate the JCMOS1 jumper.
4.
Use an electronic conductivity tool to bridge the two points of the jumper.
Figure 2:29. CMOS Jumper
Clearing BIOS Passwords
To clear the User or Supervisor password, perform the following:
1.
At the command prompt, type
CP.exe
. The Clean Password Utility is shown.
Figure 2:30. Clean BIOS Password
2.
Press 1 or 2 to clear the desired password shown on the screen.
3.
The screen displays function success or failure.
ACER Clean Password Utility V 1.1
Press 1~2 to clean any password shown as below
1.User Password
2.Supervisor Password