manualshive.com logo in svg

Acer Aspire E1-531, Service Manual, Page: 14 / 227

Share
Download
Acer Aspire E1-531 Service Manual Download Page 14

1-7

Hardware Specifications and Configurations

Front View

Figure 1:2. Closed Front View

#

Icon

Item

Description

1

Multi-in-1

Card Reader

Insert a memory card such as Secure Digital 
(SD), MultiMedia Card (MMC), Memory Stick 
PRO (MS PRO), and xD-Picture Card (xD) for 
external storage.

 NOTE: 

Only one card can be inserted at a time.

2

Power Indicator

Indicates the computer power status:

•     Off: System is off.
•     Blue: System is on.
•     Amber (flashing): S3 state

Battery Indicator

Indicates the computer battery status:

•     Amber (flashing): Battery low.
•     Amber: Battery is charging.
•     Blue: Battery is fully charged.

HDD Indicator

Indicates hard disk drive or card reader access.

Wireless 
Connectivity 
Indicator

Indicates the computer wireless connectivity 
status:

•     Off: Not connected to any wireless device.
•     Amber: A wireless device is active.

2

1

MULTIMEDIACARD

Summary of Contents for Aspire E1-531




































































































































































































































Reviews:

No comments