![background image](http://html.mh-extra.com/html/acer/aspire-6600/aspire-6600_user-manual_5877016.webp)
25
24
Adding Options to you Aspire
3 •
Push the cover slightly backward as shown in the following
figure.
4 •
Lift up the cover.
Always observe the fol-
lowi ng electrostatic dis-
charge (ESD) precautions
before install i ng a system
com ponent:
• ESD can cause permanent
damage to your computer.
• Do not remove a compo-
nent from its antistatic
packaging until you are
ready to install it.
• Wear a wrist grounding
strap before handling elec-
tronic components. Wrist
grounding straps are avail-
able at most electronic
component stores.
• At a minimum, keep a
hand in contact with the
metal system housing to
reduce the ESD effect.
Electrostatic
Discharge
Precautions
Replacing the Cover Panel
After you install the system components into the housing, you
must replace the cover panel.
1 •
Position the top cover on the housing, aligning the sides
with the rails.
2 •
Slide the cover forward until it fits into place.
You can add hard drives, memory, expansion cards, and other
options to your Acer Aspire. For directions on upgrading and
how to disassemble the computer chassis, please refer to My
Aspire Guide software.
You can find information regarding your motherboard jumper
settings by referring to the panel inside your Aspire chassis.
Opening/Closing Your Aspire Microtower
Caution!
Always turn off your computer and unplug it before
opening the case. For more information on the complete sys-
tem shut-down, refer to “Turning Your Aspire On and Off” on
page 6.
Removing the Cover Panel
1 •
Place the system on a flat surface.
2 •
Remove the four screws from the rear panel. Set the screws
aside. You will need them when replacing the cover.
Adding Options
to Your Aspire
The Un iversal Serial Bus
( USB) on your Aspi re
allows for easy and conve-
n ient expansion options.
With it, install i ng devices
such as digital cameras,
scan ners, and joysticks is a
breeze.
US B con nectors are easi ly
accessi ble from the f ront
of your Aspi re.
Connecting
USB Devices