74
Chapter 4
Forgotten Hard Disk Password
When the user keys in the wrong password three times, an error message appears. The user must now reset
the password.
1.
Make a note of the error code that is displayed with the error message.
2.
Run unlock6.exe from the DOS prompt in the following format:
unlock6 XXXXX 00
(XXXXX = HDD password error code, 00 = CRC base - default is 00)
3.
Select
Upper case ACSII Code
from the screen that appears. The HDD master password is displayed.
Make a note of this password.
4.
Reset your system. When the
Enter Primary Master HDD User Password
prompt appears, enter the
password you made a note of in step 3.
Resetting a BIOS Password
The user can reset a BIOS password using the
clnpwd.exe
utiility.
1.
Copy
clnpwd.exe
to a DOS boot up disk (or flash drive).
2.
Boot your system in DOS mode.
3.
Execute clnpwd.exe from the boot up disk (or flash drive).
4.
Press 1 or 2 to reset the required password as shown on screen.
5.
A confirmation message appears when the process is successful.
Summary of Contents for Aspire 5710
Page 6: ...VI...
Page 11: ...Chapter 1 5 System Block Diagram...
Page 31: ...Chapter 1 25...
Page 92: ...88 Chapter 4...
