Acer Aspire 4743Z, Service Manual

Page: 60 / 354

2-10 System Utilities
Changing a Password
0
1. Use the

and

keys to highlight
Set Supervisor Password
and press Enter . The
Set Supervisor Password
dialog box appears.
Figure 2-6. Set Supervisor Password
2. Type the current password in
Enter Current Password
field and press Enter .
3. Type the new password in
Enter New Password
field. Retype the password in
Confirm New Password
field.
Figure 2-7. Setup Notice
4. Press Enter . Computer sets
Supervisor Password
parameter to
Set
.
NOTE:
NOTE
:
Users can enable the Password on boot parameter.
5. Press F10 to save changes and exit BIOS Setup Utility .
If the verification is OK, the screen shows as follows.
Figure 2-8. Setup Warning: Invalid Password
The password setting is complete after the user presses Enter .
Set Supervisor Password
Enter Current Password [ ]
Enter New Password [ ]
Confirm New Password [ ]
Setup Notice
Changes have been saved.
[ Continue ]
Setup Warning
Invalid Password
[ Continue ]