background image

Chapter 1

17

Using the System Utilities

Acer Bio-Protection (only for certain models) Acer Bio-Protection Fingerprint Solution is a multi-purpose 
fingerprint software package integrated with the Microsoft Windows operating system. Utilizing the uniqueness 
of one's fingerprint features, Acer Bio-Protection Fingerprint Solution has incorporated protection against 
unauthorized access to your computer with centralized password management with Password Bank, easy 
music player launching with Acer MusicLaunch, secure Internet favorites via Acer MyLaunch, and fast 
application/website launching and login with Acer FingerLaunch, while Acer ProfileLaunch can launch up to 
three applications/websites from a single finger swipe.

Acer Bio-Protection Fingerprint Solution also allows you to navigate through web browsers and documents 
using Acer FingerNav. With Acer Bio-Protection Fingerprint Solution, you can now enjoy an extra layer of 
protection for your personal computer, as well as the convenience of accessing your daily tasks with a simple 
swipe of your finger!

For more information refer to the Acer Bio-Protection help files.

Summary of Contents for Aspire 4740G



























































































































































































































Reviews: