7
AN1600 F1 Network Storage System Quick Specification
Processor
Type
Two Intel
®
Xeon
®
E5620 DP Quad-Core (2.4 GHz, 12
MB L3 cache, 5.86 GT/s, DDR3-1066, 80 W, HT)
Features
Intel
®
QuickPath Interconnect up to 5.86 GT/s, each
direction. Per link
Support Intel
®
64 Technology, Enhanced Intel®
SpeedStep Technology, Intel
®
Simultaneous Multi
Threading, Intel
®
Virtualization Technology
Support Registered LV DDR3
Socket
Two LGA1366 sockets
NOTE:
For optimum performance, when two processors are installed, both
must be of identical revision, core voltage, and QPI/core speed.
When only one processor is installed, it must be in the Processor
Socket 1. The other socket must be empty. Processors must be
populated in sequential order. Processor Socket 1 must be populated
before Processor Socket 2.
System thermal solution is capable of supporting up to TDP 95W Intel
Xeon 5600 EP processors. (include standard, HE)
Cache Memory
12MB Shared L3 cache
Chipset
North Bridge
Intel
®
5520 Chipset
South Bridge
ICH10R
Memory
Type
DDR3 1066/1333MHz Registered memory
DIMM sockets
Twelve DIMM slots
Capacity
Registered DIMM: 2 GB, 4 GB
Maximum
memory
Registered memory: 32 GB
Minimum
memory
Registered meory: 6 GB
Memory
Protection
ECC, Mirroring, Lockstep Mode, x8 SDDC, Sparing
NOTE:
1.
Support ECC, Independent channel ode, mirroring, sparing, sparing
mode, lockstep mode, x4/x8 SDDC
2.
Support memory scrubbing
3.
Support Error reduction (BIOS will isolate the faulty DIMM and does
not enable it when system detects the faulty DIMM
4.
Event log/monitoring: Single/multi-bit ECC error
5.
Mixing of Registered memory and Unbuffered ECC memory is
NOT
supported.
Networking
Controller
Integrated single dual-port Intel
®
82576EB Gigabit
Ethernet Controllers (Dual Port 10/100/1000)
Ports
2 ports
