10
Altos T350 F2 FAQ (Frequently Asked Questions)
3. BMC (Baseboard Management Controller)
1.
What’s the BMC of Altos T350 F2?
ANSWER:
Emulex Pilot III.
2.
Is BMC embedded on Altos T350 F2?
ANSWER:
Yes, BMC is embedded on Altos T350 F2.
3.
Is Altos T350 F2 IPMI 2.0 (Intelligent Platform Management Interface 2.0) compliant?
ANSWER:
Yes, Altos T350 F2 supports IPMI 2.0.
4.
What features can Altos T350 F2 BMC support?
ANSWER:
Please refer to the table below.
Features
BMC
BMC
+
RMM4 Lite
BMC
+
RMM4 Lite
+
Dedicated
Management
Port
NOTE
IPMI 2.0
Yes
Yes
Yes
OOB (Out of Band)
Yes
Yes
Yes
IPMB (Intelligent
Platform Management Bus)
Yes
Yes
Yes
Dedicated NIC (10/100
Mbps)
No
No
Yes
2
Share-NIC
Yes
Yes
Yes
Network Fail-over
Yes
Yes
Yes
SEL (System Event Log)
Yes
Yes
Yes
Server Health Monitoring
Yes
Yes
Yes
Remote Power Control
(on/off, reset)
Yes
Yes
Yes
SOL (Serial Over LAN)
Yes
Yes
Yes
WDT (Watchdog Timer)
Yes
Yes
Yes
RMCP (Remote Management
Control Protocol)/RMCP+
Yes
Yes
Yes
Power Management (Node
Manager)
Yes
Yes
Yes
1
NOTE 1. More information of node manager can be found at:
http://www.intel.com/content/www/us/en/data-center/data-center-management/node-manage
r-general.html
NOTE 2. Dedicated NIC can be supported when Dedicated Management Port is installed.
5.
Where can I install the optional RMM4 Lite?
ANSWER:
Please refer to the picture below.