29
Hot-Key Menu
a. Outline
b. The Description For Hot-Key Function
Item Operation
Icon
Description
Volume
When the OSD is closed, press
Left or Right button will be
Volume Hot-Key Function
Volume of Audio adjustment. The
Audio will be Mute when volume=0
OSD Message
a. Outline
b. The Description For OSD Message
Item Description
Auto Config
Please Wait
1.) When Analog signal input, if User Press Hot-Key “Auto”, will show this
message, and the monitor do the auto config function.
2.) When Digital signal input, without this OSD Message.
Input Not
Supported
When the Hsync Frequency, Vsync Frequency or Resolution is out of the
monitor support range, will show this message. This message will be flying.
Cable Not
Connected
1.) Analog-Only Model: When the video cable is not connected, will show this
message. This message will be flying.
2.) Dual-Input Model: Dual-Input Model without this OSD Message.
No Signal
1.) Analog-Only Model: When the video cable is connected, but there is no
active signal input, will show this message, then enter power saving.
2.) Dual-Input Model: When the video cable is not connected, or the video cable
is connected but there is no active signal input, will show this message, then
enter power saving.
Summary of Contents for AL1922
