11
LCD Monitor General Specification
Panel type:
19 “ active matrix color TFT LCD
1). AU EN02
Display size:
376.32mm (H)
×
301.056mm(V)
Display mode:
VGA 640
×
480 (60//72/75 Hz)
SVGA 800
×
600 (56/60/72/75 Hz)
XGA 1024
×
768 (60/70/75 Hz)
SXGA 1280
×
1024 (60//75 Hz) standard resolution
Pixel pitch:
0.294mm(H)
×
0.294mm(V)
Display dot:
1280 x (RGB)
×
1024
Pixel clock:
25.2 – 135.0MHz
Contrast ratio:
θ
= 0°
AU EN02 700:1
Brightness:
AU EN02 250
cd/
㎡
Response time (Tr/Tf):
AU EN02 (25ms)
Display color:
16.7M(RGB 8 bit Data)
Viewing angle:
AU EN02 L / R
≧
85/
≧
85 (
≧
160 degrees horizontal typical)
U / D
≧
75 /
≧
75(
≧
140 degrees vertical typical)
Luminance uniformity:
> 80 % (typical)
Pc interface:
1).Video: RGB analog 0.7V peak to peak
Sync: TTL positive or negative
Signal connector:
15 pin Mini D type, (standard VGA video)
3.5 mm stereo audio jack (Audio) (For AR577 only)
Audio power:
1.5Wrms + 0.5Wrms (300Hz – 1.3kHz)
Front control:
power on/off with LED select adjustment
Interface frequency
Horizontal Frequency
30KHz --80KHz
Vertical Frequency
55Hz ------75Hz
Plug & play:
Support VESA DDC2B functions
Power Input voltage:
Single phase, 50/60HZ, 100 VAC to 240VAC
±
10%
Total output power:
60 Watt max.
Summary of Contents for AL1921
