Acer AL1716, Service Manual

Page: 27 / 50

27
MACHINE ASSEMBLY
This chapter contains step-by-step procedures on how to assemble the monitor for maintenance
and troubleshooting.
NOTE:
1. The screws for the different components vary in size. During the disassembly process, collect the screws with the
corresponding components to avoid mismatch when putting back the components.
2. The monitor surface is susceptible to scratching! Therefore, lay the monitor on a soft surface when mounting or
removing the base.
3. Wear gloves
Chassis*1
Front bezel*1
Button*1
Indicator*1
Hinge cover*1
INL Panel*1
SCREW (PW3x4,M,ZN)*4
FFC(30pin)*1
TAPE,ACE#LP1701(40x20mm)*1
INSULATOR PC#LE1710
PCBA I/F BOARD *1
CABLE 30P FFC
HRN ASS’Y 8P
SCREW (PW 3*6,M,ZN) *3
PCBA Power Board *1
INSULATOR PC,MYLAR
SCREW (PW 3*6,M,ZN) *3
PCBA Control Board *1
SCREW (PW 3*4,M,ZN)
*2
Insert B/L jack*4
Back cover*1
Arm Stand*1
(M4x10,ZN)*4
Stand plate*1
Rubber*4
Bracket Finger
*1
EMI shield Tape*2
Chapter 3