background image

 

 

 

Precautions 

 

 

 

The monitor may be damaged if placed too near a source of heat. Be aware of the 
location of radiators, cookers, open fires etc. 

 

Do not cover the slots and openings on the back or top of the cabinet as the 
monitor requires ventilation. The monitor should be located in a well-ventilated 
room to prevent the possibility of overheating.   

 

Do not allow sharp objects such as knives, pens, or pencils near the screen. If such 
objects touch the screen, the LCD panel will be permanently scratched. 

 

When cleaning this monitor, disconnect it from the electric socket to avoid any 
danger of electrocution.    A soft, lint-free cloth should be used to clean the 
outside of the monitor. A cloth very slightly moistened with a mild detergent 
solution will clean stubborn stains. Keep liquids away from the display screen, 
including sprays. Do not spray liquid directly - it is best to lightly spray on to a 
cloth and wipe. If liquid gets inside the monitor it can cause electrical shock 
and/or damage to the unit. 

 

If you encounter a problem, please check the "Troubleshooting" section first. If 
this does not resolve the problem do not attempt to repair the monitor by yourself; 
opening or removing covers can lead to injury or death through electrocution 
among other hazards. Please contact a qualified engineer if you find the 
troubleshooting section does not help. 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Recycling Information 

 

We, the Acer Incorporated. care very much about our environment protection 

strategy and firmly believe that it helps us have healthier earth via appropriate 
treatment and recycling of industrial technology devices at the end-of-life. 

These devices contain recyclable materials, which can be re-decomposed and 

re-integrated into brand-new marvels. On the contrary, other material can be 
classified to hazardous and poisoned substances. We strongly encourage you to 
contact the provided information to recycle this product. 

 

United State :

 

http://www.ciwmb.ca.gov/electronics/act2003/Recovery/Approved/

         

 
Asia :   

http://recycle.epa.gov.tw/public/public4_2.htm

 

 

Europe

 :   

EL-Kretsen: 

http://www.el-kretsen.se/

 

EL-retur: 

http://www.elretur.no/

 

SWICO: 

http://swico.one.webbuild.ch/

 

 

 

 
 

Summary of Contents for AL1706











Reviews: