Acer AcerPower F5, Service Manual

Page: 50 / 118

44 Chapter 2
Integrated Peripherals
All onboard peripherals can be set up through this menu.
Parameter Description Options
USB 2.0 Controller Enable this item if the system supports USB 2.0 Enabled : Enable USB 2.0
Controller
Disabled : Disable USB 2.0
Controller
USB Controller This item is used to enable or disable the on-chip
USB Enabled : Enable USB Controller
Disabled : Disable USB Controller
USB Keyboard Support This item lets you enable or disable the USB
keyboard driver within the onboard BIOS. The
keyboard driver is simulates legacy keyboard
command and lets you use a USB keyboard
during POST or after boot if you do not have a
USB driver in the operating system Enabled : Enable USB Keyboard
Support
Disabled : Disable USB Keyboard
Support
USB Mouse Support This item lets you enable or disable the USB
mouse driver within the onboard BIOS. The
keyboard driver simulates legacy mouse
command and lets you use a USB mouse during
POST or after boot if you do not have a USB
driver in the operating system. Enabled : Enable USB Mouse
Support
Disabled : Disable USB Mouse
Support
Onboard LAN function This function is used to set whether the onboard
LAN card is enabled. Enabled
Disabled
Onboard LAN Boot ROM This function decide whether to invoke the boot
ROM of the onboard LAN chip Enabled
Diabled
Onboard 1394 Controller THis item allows users to enable or disable the
onboard 1394 Controller function. Enabled
Disabled
Serial Port 1/2 Address This option is used to assign the I/O address and
interrupt request (IRQ) for onboard serial port 1
or 2 Auto : BIOS will automatically
setup the port 1 or 2 address
3F8/IRQ4 (Serial Port 1 default)
2F8/IRQ3 (Serial Port 2 default)
3E8/IRQ4
2E8/IRQ3
Diabled : Disable onboard Serial
port 1 or 2
Options
Disabled
Enabled
Help Item
CMOS Setup Utility - Copyright (C) 1985-2004, American Megatrends, Inc.
Integrated Peripherals
USB 2.0 Support [Enabled]
USB Controller [Enabled]
USB Keyboard Support [Enabled]
USB Mouse Support [Enabled]
AC97 & Azalia LINK A [Enabled]
Onboard LAN function [Enabled]
Onboard LAN boot ROM [Disabled]
Onboard 1394 Controller [Enabled]
Serial Port1 Address [3F8/IRQ4]
Serial Port2 Address [Disabled]
Parallel Port Address [378]
Parallel Port Mode [ECP]
ECP Mode DMA Channel [DMA3]
Parallel Port IRQ [IRQ7]
: Move
F10: Save
F1: General help
mnlk +/-/: Value
Enter : Select
ESC: Exit
F9: Load Default Settings