Acer AcerPower F2, Service Manual

Page: 31 / 104

Chapter 2 23
Advanced BIOS Features
The following screen shows the Advanced BIOS Features:
The following table describes the parameters found in this menu. Settings in boldface are the default and
suggested settings.
Parameter Description Options
CPU Feature The items allow you to set the Thermal Monitor
1 (on die throttling) and the Thermal Monitor 2
(on ratio & VID transition). Press [Enter]
Hard Disk Boot Priority This option is used to select the priority for HDD
startup. After pressing <Enter> you can select
the HDD using the <PageUp>/<PageOn> or
Up/Down arrow keys, and change the HDD
priority using <+> or <->; you can exit this menu
by pressing <Esc>. Press [Enter]
CPU L1 & L2 Cache Uses internal level 1 (L1) and external level 2
(L2) cache memory to improve performance. Enabled
Disabled
Hyper-Threading
Technology This item is only available when CPU and the
chipset support Hyper-Threading. Enabled
Disabled
Quick Power On Self Test This parameter speeds up POST by skipping
some items that are normally checked. Enabled
Disabled
First / Second / Third Boot
Device The items allow you to set the sequence of boot
device where BIOS attempts to load the disk
operating system. Floppy, LS120, HDD-0, SCSI, CDROM,
HDD-1, HDD-2, HDD-3, ZIP, LAN,
Disabled (Disable this sequence).
The sequence following the order of
HDD, Floppy and CD-ROM is
recommended.