manualshive.com logo in svg

Acer AcerNote Nuovo notebook computer, User Manual, Page: 85 / 157

Share
Download
Acer AcerNote Nuovo notebook computer User Manual Download Page 85

                                                                                                                                           

4-10

User’s Manual

4.9

Miscellaneous Options

4.9.1

Additional Power Packs

Lithium-Ion Battery Pack

It is good practice to have a spare battery pack around, especially when you
travel.  The Li-Ion (lithium-ion) smart battery supplies more power than a
conventional NiMH (nickel metal-hydride) battery.  With power management,
you get even more power on-the-go.

Attaching the Battery Compartment Cover

Each battery pack comes attached with a battery compartment cover.  In
case the cover gets detached, follow these steps to re-attach the cover to the
battery.

1. Position the battery compartment

cover over the battery pack.

2. Using a little force, slide the

battery compartment cover over
the battery until both the cover
and the battery are firmly
attached.

Summary of Contents for AcerNote Nuovo notebook computer






























































































































































Reviews:

No comments