manualshive.com logo in svg

Acer AB2x280 F1, Service Manual

Share
Download
Acer AB2x280 F1 Service Manual Download Page 61

Hardware removal and installation

53

5.

(Optional step) Add the front left and right handles to the enclosure using five screws to secure each 
handle. Install a thumbscrew through the bottom hole of each handle. 

NOTE: 

These handles are optional and need only be installed when mounting the system into a short rack. 

When mounting into a deep rack, they are unnecessary and regular screws should be used instead of 
thumbscrews. 

Be aware that these handles are not to be used for lifting the system, they are only to be used to slide the 
system within the rack.

6.

With one person on either side (see the descriptive label on the side of the enclosure), lift the enclosure 
and slide it into the installed rails. 

WARNING:

Be sure that the enclosure is empty of all blades, power supplies, switches and management 

modules 

BEFORE

 lifting. These should be installed 

AFTER

 the enclosure is mounted in the rack. Injury 

and damage may occur if components are not removed from the rack prior to installation.

7.

After pushing the enclosure all the way into the rack, use two roundhead screws on each side of the 
server to lock it into place.

Summary of Contents for AB2x280 F1































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands