21
Eng
lis
h
Using a web browser to control your projector
1. Make sure that your PC and the projector are connected to the same local
USB 5V
(Standby)
Selecting "On" enables the function. The MHL port(s) and the
DC 5V out port/USB A port (if available) on the projector can
output 5V power when the projector is turned on or in
standby mode.
Only MHL port(s) will provide power output when
MHL port(s) and USB A port are both plugged.
HDMI CEC
Selecting "On" allows synchronized power ON/OFF operation
between the projector and a CEC-compatible device
connected to the HDMI port of the projector.
This function is only available for the HDMI port.
Low Input Lag
This function is especially suitable for gaming environment. It
reduces input to output latency and helps create a seamless
experience.
This function is only available for certain input timings.
After turned on, performing Auto Keystone or
adjusting the following settings will deactivate this
function: Aspect ratio, Keystone, H. Position, V.
Position, Frequency, HDMI Scan Info, Digital Zoom.
When Display Mode is Game Dark or Game Bright, this
function will be automatically turned on.
LAN
LAN (Standby)
The default value is "Off". Choose "On" to enable the LAN
connection.
LAN IP/Mask
Identify IP and Mask address.
MAC Address
Identify MAC address.
DHCP
Selecting "On" when you are in a DHCP environment to
obtain the IP address automatically. Selecting "Off" and
you’ll have to manually assign the IP Address, Subnet Mask,
Gateway and DNS.
LAN Reset
Press "ENTER" after choosing "Yes" to return all items on the
LAN Setting page to the default settings.
Reset
Press "ENTER" after choosing "Yes" to return the display
parameters on all menus to the factory default settings.