manualshive.com logo in svg

Acer A211H, Service Manual, Page: 50 / 88

Share
Download
Acer A211H Service Manual Download Page 50

5. Troubleshooting (continued)

5.3.2  Nothing displays on the screen (Screen is black and colour of LED is blue)continued:

OK

NG

OK

NG

Failure Point

Printed wire broke between CN301 
pin 9, 10,11 and I301 pin S.

OK

NG

OK

Failure Point

1) Printed wire broke between Q303 

pin 3, R305, R307, C309 and I302 
pin G.

2) Q303 is failure.

Failure Point

1) Printed wire broke between Q303

pin 1 and I306 pin 29.

2)  I306 is failure.

Failure Point

I302 is failure.

Failure Point

1) Printed wire broke between CN304

and I306 LVDS signals.

2) I306  is failure.

Failure Point

1) The LVDS cable broke between 
    CN304 and LCD panel module.
2) LCD panel module is failure.

OK

NG

Check the 5V power are 

supplied on CN304 pin 1, 2, 3, 4, 5

(to the LCD panel module)

Check if the Voltage on I302

pin S that is DC power at 5V.

Check if the MOS FET Gate level 

on I302 pin G, that Gate level is low.

Check the PANEL

VCC_EN signal of the Q303 pin 1

(with R309) at high level.

NG

Check the CN304 all LVDS signals.

Continue

48

Go to contents page

ACER A211H/A221HQ

Summary of Contents for A211H

























































































Reviews:

No comments