2-
16
User’s Guide
2.5
Power Management
The Power Management menu lets you configure the system power
management features.
The following screen shows the Power Management parameters with their
default settings:
Power Management
Page 1/1
Power Management Mode .................. [Disabled]
IDE Hard Disk Standby Timer ......... [---]
System Sleep Timer .................. [---]
Stop CPU Clock in Sleep State .... [---]
Wakeup Event
Modem Ring .......................... [Disabled]
↑↓
= Move Highlight Bar,
→
←
= Change Setting, F1 = Help
2.5.1
Power Management Mode
This parameter allows you to reduce power consumption. When this
parameter is set to
Enabled
, you can configure the IDE hard disk and
system timers. Setting to
Disabled
deactivates the power management
feature and all the timers.
IDE Hard Disk Standby Timer
This parameter allows the hard disk to enter standby mode after inactivity of
1 to 15 minutes, depending on your setting. When you access the hard disk
again, allow 3 to 5 seconds (depending on the hard disk) for the disk to
return to normal speed. Set this parameter to
OFF
if your hard disk does not
support this function.
