-
8-
HDMI PIN DEFINITION
Type A (Receptacle) HDMI
HARDWARE INSTALLATION
1.
Connect a HDMI or DVI source (such as a Blu-ray Disc player) to the transmitting unit AcePro-
CE88-1-TX.
2.
Connect a HDMI or DVI display (such as a LCD TV) to the receiving unit AcePro-CE88-1-RX.
3.
Connect IR Blaster/Receiver to both TX and RX units.
4.
Connect a Cat-5/5e/6 cable between the transmitting and receiving units.
5.
Make sure this Cat-5/5e/6 cable is tightly connected.
6.
Plug in 12V DC power supply unit to the power jack of the receiving unit AcePro-CE88-1-RX or
the transmitting unit AcePro-CE88-1-TX.
Pin 1
TMDS Data2+
Pin 11 TMDS Clock Shield
Pin 2
TMDS Data2 Shield
Pin 12 TMDS Clock
Pin 3
TMDS Data2
Pin 13 CEC
Pin 4
TMDS Data1+
Pin 14 Reserved (N.C. on device)
Pin 5
TMDS Data1 Shield
Pin 15 SCL
Pin 6
TMDS Data1
Pin 16 SDA
Pin 7
TMDS Data0+
Pin 17 DDC/CEC Ground
Pin 8
TMDS Data0 Shield
Pin 18 +5V Power
Pin 9
TMDS Data0
Pin 19 Hot Plug Detect
Pin 10
TMDS Clock+
