background image

 

6 / 46 

 

1.3  Caution 

 

All precautions detailed by the supplier of your manual wheelchair must be followed and added 
to the recommendations defined in this manual. Any negligence to follow these 
recommendations may cause serious bodily harm or death. 

 

 

 

 

The handling or use of the Yomper by someone who hasn’t received the instructions of this manual may 
cause serious bodily harm or death. 

 

You  need to get  familiar with the performances  of the Yomper before using  it regularly. Do  not drive 
outside until you handle perfectly the system, without colliding the walls or any other object. 

 

The addition  of  the Yomper to the  manual wheelchair gives different sensations.  Take the time  to get 
familiar with these new sensations. 

 

The using methods of the Yomper are different for all users depending on their functions and levels of 
disability. 

 

Using anti tipping wheels is COMPULSORY with a Yomper. It will help you not to tip over, but will 
also limit the ability to be pulled on pavements or for any other manoeuvers. 

 

The specificities given by the supplier of the manual wheelchair may be slightly affected by the addition 
of the Yomper. 

 

Do not take an escalator or a moving pavement with your Yomper. You may be seriously injured. 

 

Do not bend backwards to reach objects, it may tip over your wheelchair. 

 

The center of gravity of the manual wheelchair may be affected by the addition of the Yomper. 

 

Do not bend forwards, do not change your position on the seat to reach something in front of you, your 
wheelchair may tip over (forwards or on the side). 

 

Do not make your manual wheelchair spin without assistance, unless you are used to doing it. 

 

Do not stand on the frame of the manual wheelchair. 

 

Your manual wheelchair is not conceived for working out with weight and is not safe as a seat during 
your work out. It changes the stability of your wheelchair and may tip it over. 

 

Make sure your battery is fully charged before using it.  

 

 

 

 

!

!

!

Summary of Contents for Yomper 2.5 Plus















































Reviews: