27 / 46
3.4 Stop of the Yomper
In indoor and outdoor mode
1.
Press the main button once, the Yomper engine stops
2.
The Yomper power LED switches back to fixed
3.
If you stop, thespeed level will go back to 1 for safety (to avoid a too violent reboot inadvertently).
4.
Attention: you have to brake the wheelchair, the Yomper does not have brakes, it goes freewheeling
In indoor mode (green led Strip)
1.
You can also
brake on the handrails
to stop the engine of the yomper
2.
Once stopped, the led Strip switches to fixed ignition
3.5 Speed increase
•
You can change the speed of the Yomper by rolling or stopping
•
Press the arrow
furthest
away from you to
increase
the speed
•
The number of LEDs lit represents the selected speed level. When you press, a new LED will illuminate
•
Once the maximum (5), a new support has no effect
•
The actual speed at which you propel the Yomper depends on:
1.
Selected speed (from 1 to 5)
2.
From current mode (indoor, LED Strip in green, outdoor, LED Strip in red)
3.
The setting of the Yomper
3.6 Reduced speed
•
You can change the speed of the Yomper by rolling or stopping
•
Press the arrow
closest
to you to
decrease
the speed
•
The number of LEDs lit represents the selected speed level. When you press, an LED turns off
Summary of Contents for Yomper 2.5 Plus
Page 10: ...10 46...
Page 11: ...11 46...
Page 12: ...12 46 Mounting bracket for rigid wheelchair Mounting bracket for foldable wheelchair...