Doc. # 7430-0710-01 Rev. C
Page
12
ēKo Pro Series User’s Manual
Figure 3-2. Typical network configuration
3.2 Setting up the ēKo base radio
1.
Remove the
ë
Ko base radio from its box
2.
Connect one end of the USB cable to the USB connector of the
ë
Ko base radio and plug
the other end of the cable into the remaining USB slot on the
ë
Ko gateway labeled “Disk
2”.
Figure 3-
3. ēKo base radio connections
The
ë
Ko base radio receives radio messages from the deployed
ë
Ko nodes. It is can easily be
mounted indoors on a window or window ledge. Several other deployment options are also
available (see section 5.1).
3.3 Starting the system
1.
Insert the included power adapter into a standard electrical outlet and plug the power
connector into the
ë
Ko gateway. Upon application of external power, the
ë
Ko gateway
