17
3.4.3 PPPoE Configuration
PPPoE
is usually used by ISPs which provide ADSL line to their subscribers. Usually an ISP gives
Login ID
and
Password
to users for login when connecting to Internet.
Service Name
,
AC Name
is usually optional.
MTU
: Sometimes ISP sets different MTU size than 1492. This value would be set to hardware.
Dial-on-demand
:
If checked, router won’t dial this session until received a LANWAN packet. If unchecked, router dials this session
immediately after system powered up.
Silent timeout
: If specified a non-zero value, router disconnects this
session after specified idle time.
Auto Reconnect
: If checked, router redials this session if session previously
terminated by ISP.
Dial Status
: Current status of this session. May be “Connected”, “Connecting”, or “Disconnect”
Pressing the Save and Restart saves parameters and reboots the router.
Summary of Contents for Wireless 11g Router
