![Acecad acedialer SD1 User Manual Download Page 10](http://html1.mh-extra.com/html/acecad/acedialer-sd1/acedialer-sd1_user-manual_457584010.webp)
9
Location Service.)
Under an emergency situation
, press the
Emergency
button
on the Controller for
about 0.5 seconds until the indicator rapidly flashes. Then a call will be made and a text
message with your approximate location will be sent to the assigned emergency contacts
from and without touching your phone.
Tip! It is not necessary to watch the indicator. You can release the button after about 0.5
seconds.
7. Troubleshooting
If the Controller cannot work properly with your phone, please verify the following:
The pressed button on the Controller has been assigned to a correct setting in the
Remote Speed Dial App on your phone.
The Controller is paired with your phone.
Turn on Bluetooth in your phone.
The distance between the Controller and your phone is usually up to approximately 10
meters (33 feet).
The battery is correctly installed into the Controller.
Check the Battery Level in the Remote Speed Dial App on your phone. When the
Battery Level indicator turns red or the battery in the Controller has been used for a
long time, we recommend you to replace the battery in the Controller with a new one.