Ace Ultra Sagan, Instruction

Page: 19 / 24

Front Fuselage
The geardoor servo is installed like you
see on the picture . For the servo
screws us the 3 x 16mm the linkage for
the linkage use the M3 x 60mm threat
rod with 2 plastic ball link and M3 x 12
screws with locknut
The Front fuselage is as much as
possible preassembled, the
geardoor and the horn already
finish at the factory. We
recommend to take out the
retract for check all screws are
tight and for intergrade the Servo.