Ace Ultra Sagan, Instruction

Page: 10 / 24

Wing Flap
The flap horns are installed for you
at the factory. You only need to
install the servo and linkage. The
length of the servo arm should be
as long as possible but not interfere
with the Wing skin . The linkage is
made from an M3 x 45 mm
threaded rod.
On booth side use the M3 ball link
with M3 x 16 Allen screw and stop
nut.
As always, use only the included 3 x
16 mm sheet metal screws to install
the servo into the wood rib.