Disassembly
Removing the System Memory (RAM) 2 - 19
2.Disassembly
5.
Pull the latches to release the second and third modules if necessary.
6.
Insert a new module holding it at about a 30° angle and fit the connectors firmly into the memory slot.
7.
The module’s pin alignment will allow it to only fit one way. Make sure the module is seated as far into the slot as it
will go. DO NOT FORCE the module; it should fit without much pressure.
8.
Press the module in and down towards the mainboard until the slot levers click into place to secure the module.
9.
Replace the bay cover and screws (
make sure you reconnect the fan cable before screwing down the bay
cover
).
10. Restart the computer to allow the BIOS to register the new memory configuration as it starts up.
www.acecomputers.com
Summary of Contents for Mustang W650R
Page 1: ......
Page 60: ...Disassembly 2 28 2 Disassembly www acecomputers com...
