Ace ALCOSCAN Pro MED Operating Manual Download Page 20

 

 

 

 
 
 

 

Technical data 

Indication of the BAC 

0,00 to 5,00 ‰ (default, if you want other settings please contact ACE 
customer service)  

Accuracy 

+/- 0,05‰ 

Warm-up time 

5 seconds up to max.2 minutes 

Reaction time 

Within 10 seconds at 1,00 ‰ 

Sensor 

Fuell cell sensor 

Calibration 

Calibration done by ACE or sensor change (changeable sensor module), 
new sensors are available at ACE 

Energy supply 

2 pieces AA Alkaline batteries (1.5 V, LR6, Mignon) 

Battery capacity 

about 3.000 measurements 

Measurements memory 

about 500 measurements can be saved in the ACE Pro MED 

Mouthpieces 

Hygienic mouthpieces of ACE series (single packaged) 

Dimensions 

64 mm x 133 mm x 33 mm (W x L x H) 

Weight 

198 g (inclusive 2 batteries) 

Operation temperature 
Storage temperature 

-5  to 40° C 
-10 to 50° C 

 

 
 

Warranty and liability 

 

Warranty 

The  ACE  Handels-  und  Entwicklungs  GmbH  will  give  a  warranty  of  two  years  after  purchase  for 
material  and  processing  errors  for  the  product,  to  which  this  warranty  and  liability  declaration  is 
attached,  in  all  versions  and  designations;  a  warranty  of  one  year  for  the  sensor.  This  warranty 
includes  the  electronics  as  well  as  the  casing  or  the  sensor  without  sampling  components. 
Components  that  are  inevitably  destroyed  upon  effectiveness  (such  as  fuses)  are  not  part  of  this 
warranty. The warranty is valid from the date of delivery or from the date of first activation (always 
the shorter period), if this is not stated otherwise in the accompanying literature of the product by 
ACE Handels- und Entwicklungs GmbH. 
 

Limitation of warranty and liability 
 
1. Product description 

The ACE Handels- und Entwicklungs GmbH rejects any further expressly stated or implied warranty, 
including  the  marketability  and  suitability  for  a  determined  purpose.  This  warranty  especially 
excludes calibration. After changing the sensor, calibration is absolutely necessary. 
 
When an exchange of the sensor or a calibration is necessary for a product, the user may receive a 
estimate of costs. Should the user refuse the estimate, the ACE Handels- und Entwicklungs GmbH will 
send the product back unrepaired / uncalibrated and the product will be labelled accordingly. 
Should  the  product  not  fulfil  the  warranty,  the  claim  of  the  buyer  and  the  obligations  of  the  ACE 
Handels-  und Entwicklungs GmbH are limited exclusively and at  the discretion of the  ACE Handels- 

Summary of Contents for ALCOSCAN Pro MED






















Reviews: